Impact of glazing type and orientation on the optimum dimension of windows for office room in hot climate

Updata:01-01-1970

Source:
By:Chahrazed Mebarki, Essaid Djakab, Sidi Mouhamed Karim El Hassar, Mohamed El-Amine Slimani

DOI: https://doi.org/10.30564/jaeser.v1i1.271

Abstract:

This study aims to show the impact of orientation and glazing type on optimum window size in hot climate using genetic algorithms. In winter the optimization of window size is obtained thanks to thermal gains from solar radiation, taking into account this free heat gains from the sun reduces heating demand of the building. In summer the optimization of window size is complex, in this case, the window is considered as a heat gains element. For a hot climate, the sun can be used as a passive strategy to reduce energy consumption. An optimal window size allows avoiding problems of glare and overheating. ASHRAE proposed a Window to Wall Ratio (WWR) which is considered as the optimal window size that ensures minimum annual thermal loads, this coefficient neglect different parameters such as (Glazing type, the orientation, daytime). A typical office room located in Ghardaia (South of Algeria) is selected as a case study. The results show that daylight is a key factor in limiting the window size in hot climate. The WWR cannot be considered as optimal for the whole year; this study shows that the optimal window size varies with daytime.

References:

[1] Abdeen Mustafa Omer. Energy use and environmental impacts: A general review; Journal of Renewable and Sustainable Energy 1, 053101 (2009); DOI: https://doi.org/10.1063/1.3220701. [2] Hasan Karabay, Muslum Arıcı, Multiple pane window applications in various climatic regions of Turkey; Energy and Buildings 2012 (45): 67–71. [3] Alan, P, Waldo, B, Rodrigo, E, Felipe, E, P. Thermal and lighting behavior of office buildings in Santiago Belgium.Elsevier. Energy and Buildings (2011) 47: 441–449. [4] Scartezzini, J.-L, Paule, B, Chuard, D, Simos, S (Eds.). Principles of Lighting, RAVEL Swiss Action Programme for Rational Use of Energy, EDMZ, Bern, Switzerland 1993 (81): 1166–1179. [5] Document Technique Réglementaire, Réglementation thermique des bâtiments d’habitation, CNERIB, Algérie, 1997. [6] MEMENTO Saint Gobain Glass, 2007. [7] 2001 ASHRAE Fundamentals Handbook, chapter 30. [8] International Commission on Illumination, Daylight: International Recommendations for the Calculation of Natural Daylight No. 1970, Publication Cffi no.16 (E-3.2)). [9] Littlefair P. J. Predicting Annual Lighting use in Daylit Buildings. Building and Environment 1990; 25(1):43-54. [10] Sokol, D, Ardeshir, M. A simple model for the derivation of illuminance values from global solar radiation data. Springer. BUILD SIMUL. 2013; 6: 379–383.

Tags: