Maintenance Management Research of a Large-span Continuous Rigid Frame Bridge Based on Reliability Assessment by Using Strain Monitored Data

Source:
By:Ying hua Li, Kesheng Peng, Junyong He, Qiangjun Shuai, Gang Zou

DOI: https://doi.org/10.30564/jaeser.v4i2.3128

Abstract: When the bridge components needing maintenance are the world problem at present, and the health monitoring system is considered to be a very helpful tool for solving this problem. In this paper, a large number of strain data acquired from the structural health monitoring system (SHMS) installed on a continuous rigid frame bridge are adopted to do reliability assessment. Firstly, a calculation method of punctiform time-dependent reliability is proposed based on the basic reliability theory, and introduced how to calculate reliability of the bridge by using the stress data transformed from the strain data. Secondly, combined with “Three Sigma” principle and the basic pressure safety reserve requirement, the critical load effects distribution function of the bridge is defined, and then the maintenance reliability threshold for controlling the unfavorable load state which appears in the early operation stage of this type bridge is suggested, and then the combination of bridge maintenance management and health monitoring system is realized. Finally, the transformed stress distribution certifies that the load effects of concrete bridges practically have a normal distribution; as for the concrete continuous rigid frame bridge with C50 strength grade concrete, the retrofit reliability threshold should be valued at 6.13. The methodology suggested in this article can help bridge engineers do effective maintenance of bridges, which can effectively extend the service life of the bridge and bring better economic and social benefits. References:

[1]Muria V. D. et al., 1991. “dynamic structural properties of cable stayed tampico bridge”. J. Struct. Eng., 11 (117). [2]Cheung M. S., Tadros G. S., 1997. “Field monitoring and research on performance of the confederation bridge”. J. CIV. Eng., 6 (24), 951-962. [3]Curran P., Tilly G., 1999. “Design and Monitoring of the Flintshire Bridge”. STRUCT. ENG. INT., 3 (9), 225-228. [4]Cheung M. S., Naumoski N., 2002. “The first smart long-span bridge in Canada—health monitoring of the Confederation Bridge”. Proceedings of the 1st international workshop on structural health monitoring of innovative civil engineering structures, Winnipeg, ISIS Canada Corporation. [5]Wong K. Y., 2004. “Instrumentation and health monitoring of cable-supported bridges”. STRUCT. CONTROL HLTH., 11 (2), 91-124. [6]Chan T.H.T. et al., 2006. “Fiber Bragg grating sensors for structural health monitoring of Tsing Ma bridge: Background and experimental observation”. Eng. Struct., 28 (5), 648-659. [7]Simon D. N. et al., 2011. “Messina Bridge-Structural Health Monitoring System”. [8]Li H. N. et al., 2014. “Reviews on innovations and applications in structural health monitoring for infrastructures”. Struct. Monit. and Maint., 001-045. [9]Ni Y.Q., 2014. “Sensing solutions for assessing and monitoring super-tall towers”. Sensor Technologies for Civil Infrastructures, Woodhead Publishing Series in Electronic and Optical Materials, Volume 2, 246- 274. [10]Kim M.H., Lee J.M., 2014. “Sensing solutions for assessing and monitoring offshore structures”. Sensor Technologies for Civil Infrastructures, Woodhead Publishing Series in Electronic and Optical Materials, (2), 50-564. [11]Habel W.R., 2010. “Structural health monitoring systems for reinforced concrete structures”. Non-Destructive Evaluation of Reinforced Concrete Structures: Non-Destructive Testing Methods,Woodhead Publishing Series in Civil and Structural Engineering, (2), 63-94. [12]Rodriguesa C. et al., 2010. “Development of a longterm monitoring system based on FBG sensors applied to concrete bridges”. Engineering Structures, 8(32), 1993-2002. [13]Abbiati G. et al., 2015. “Time-dependent estimators for on-line monitoring of full-scale structures under ambient excitation”. Mechanical Systems and Signal Processing, (60–61), 166-181. [14]Behmanesha I. et al., 2015. “Hierarchical Bayesian model updating for structural identification”. Mechanical Systems and Signal Processing, (64-65), 360-376. [15]Santos I. L. d. et al., 2014. “A localized algorithm for Structural Health Monitoring using wireless sensor networks”. Information Fusion, Special Issue: Resource Constrained Networks, (15), 114-129. [16]Engel A. et al., 2014. “Hardware-accelerated Wireless Sensor Network for Distributed Structural Health Monitoring”. Procedia Technology, 2nd International Conference on System-Integrated Intelligence: Challenges for Product and Production Engineering, (15), 737-746. [17]Ditommaso R., Ponzo F.C., 2015. “Automatic evaluation of the fundamental frequency variations and related damping factor of reinforced concrete framed structures using the Short Time Impulse Response Function (STIRF)”. Engineering Structures, (82), 104-112. [18]Thoft-Christensen P., 1995. “Advanced bridge management systems”. Struct. Engrg. Rev. Oxford, England, 7(3), 151-163. [19]Frangopol D. M., Hearn G. et al., 1996a. “Structural reliability in bridge engineering”. McGraw-Hill, New York. [20]Frangopol D. M. et al., 1998b. “Structural reliability in bridge engineering”. J. Bridge Eng., ASCE, 3(4), 151-154. [21]Frangopol D. M., Das P. C., 1999. “Management of bridge stocks based on future reliability and maintenance costs”. Current and future trends in bridge design, construction, and maintenance. Thomas Telford, London, 45-58. [22]Thoft-Christensen P., 1999. “Estimation of bridge reliability distributions”. Current and future trends in bridge design, construction, and maintenance. Thomas Telford, London, 15-25. [23]Frangopol D. M. et al., 2001. “RELIABILITY-BASED LIFE-CYCLE MANAGEMENT OF HIGHWAY BRIDGES”. J. COMPUT. CIVIL ENG., 15(1), 27-34. [24]Ko J. M., Ni Y. Q., 2005. “Technology developments in structural health monitoring of large-scale bridges”. ENG. STRUCT., 27, 1715-1725. [25]Akgul F., Frangopol D. M., 2005. “Lifetime Performance Analysis of Existing Reinforced Concrete Bridges”. J. INFRASTRUCT SYST., 11(2), 122-128. [26]Stewart M. G., Mullard J. A., 2007. “SpatialTime-Dependent Reliability Analysis of Corrosion Damage and the Timing of First Repair for RC Structures”. Eng. Struct., (29), 1457-1464. [27]Mustafa G., Catbas F. N., 2009. “Statistical pattern recognition for Structural Health Monitoring using time series modeling: Theory and experimental verifications”. MECH. SYST. SIGNAL PR., 23 (7), 2192-2204. [28]Sunyong K., Frangopol D. M., 2010. “Optimal planning of structural performance monitoring based on reliability importance assessment”. PROBABILIST ENG. MECH., 25 (1), 86-98. [29]Orcesia A. D., Frangopol D. M., 2011. “Optimization of bridge maintenance strategies based on structural health monitoring information”. STRUCT. SAF., 33 (1), 26-41. [30]Helder S. et al., 2013. “Construction assessment and long-term prediction of prestressed concrete bridges based on monitoring data”. ENG. STRUCT., 52, 26- 37. [31]Liu Y. F. et al., 2014. “Reliability updating and prediction of bridge structures based on proof loads and monitored data”. CONSTR. BUILD. MATER., 66(15), 795-804. [32]Liang D., Yuan S. F., 2015. “Structural health monitoring system based on multi-agent coordination and fusion for large structure”. Advances in Engineering Software, (86), 1-12. [33]Sheng Ouyang, 2009. “CONTROL TECHNOLOGY OF CONSTRUCTING T-RIGID FRAME TURRET BRIDGE OF NO.1 BRIDGE FOR AN EXPRESSWAY”. Industrial buildings, Suppl (39), 1079-1065. [34]Zhang W. et al, 2007. “The strain field method for structural damage identification using Brillouin optical fiber sensing”. Smart Mater. Struct, 16, 843-850. [35]Duan M. D., 1998. “The calculation of creep coefficient and application of< the highway reinforced concrete and prestressed concrete bridge culvert design specifications>”. Journal of China Highway, (10), 70-76. [36]Ministry of Housing and urban-rural development of the people’s Republic of china. 2008. “Unified Standard for Reliability design of Engineering Structures (GB50153-2008)”. China Building Industry Press, Beijing. [37]The transportation department specification of the people’s Republic of china, 2004. “Code for Design of Highway Reinforced Concrete and Prestressed Concrete Bridges and Culverts (JTG D62-2004)”. China Communications Press, Beijing. [38]Zhang J. L., Liu Y, 2004. “Statistical Models for the Lifetime Resistance of Concrete Bridges”. Journal of Changsha University of Science, 1(1), 27-33. [39] James Evans, William M. Lindsay, 2010. The Management and Control of Quality (7th international edition). South-Western, Division of Thomson Learning