Strength & Conduct of Reinforced Concrete Corner Joint under Negative Moment Effect

Updata:01-01-1970

Source:
By:Rasha Waheeb

DOI: https://doi.org/10.30564/jaeser.v4i4.3607

Abstract:
The aim of our study is to reveal the effect of steel reinforcement details,
tensile steel reinforcement ratio, compressed reinforcing steel ratio,
reinforcing steel size, corner joint shape on the strength of reinforced
concrete Fc' and delve into it for the most accurate details and concrete
connections about the behavior and resistance of the corner joint of
reinforced concrete, Depending on the available studies and sources in
addition to our study, we concluded that each of these effects had a clear
role in the behavior and resistance of the corner joint of reinforced concrete
under the influence of the negative moment and yield stress. A study
of the types of faults that can be reinforced angle joints obtains details
and conditions of crushing that are almost identical for all types of steel
reinforcement details and the basic requirements for the acceptable behavior
of reinforced concrete joints in the installations and the efficiency of the
joint and this may help us to prepare for disasters, whether natural or other,
as happens with tremors The floor and failure that may occur due to wrong
designs or old buildings and the possibility of using those connections to
treat those joints and sections in reinforced or unarmed concrete facilities
to preserve the safety of humans and buildings from sudden disasters and
reduce and reduce risks, as well as qualitative control over the production
of concrete connections and sections free from defects to the extreme.
References:

[1]Richart, F. E., Olson, T. A., & Dolan, T. J. (1938). Tests of reinforced concrete knee frames and bakelite models. Univ. Illinois Expt. Sta. Bull, 307.5.)kemp , E.L. and Makherjee P.R. [2]Moretti, M. L., Tassios, T. P., & Vintzileou, E. (2014). Behavior and Design of Corner Joints under Opening Bending Moment. ACI Structural Journal, 111(1). [3]Pham, A. T., Pham, X. D., & Tan, K. H. (2019). Slab corner effect on torsional behaviour of perimeter beams under missing column scenario. Magazine of Concrete Research, 71(12), 611-623. [4]Nabil, M., Hamdy, O., & Abobeah, A. (2016). Affecting aspects on the behaviour of frame joints. HBRC journal, 12(2), 147-162. [5]Johansson, M. (1996). New reinforcement detailing in concrete frame corners of civil defence shelters: Non-linear finite element analyses and experiments. Chalmers University of Technology. [6]Abdul-Wahab, H. M., & Ali, W. M. (1989). Strength and behavior of reinforced concrete obtuse corners under opening bending moments. Structural Journal, 86(6), 679-685. [7]Sleiman, N. (2017). Tests on GFRP reinforced concrete knee-joints subjected to negative moments (Doctoral dissertation, University of Waterloo). [8]Moehle, J. P., Hooper, J. D., & Lubke, C. D. (2008). Seismic design of reinforced concrete special moment frames. US Department of Commerce. [9]ACI Committee. (2008). Building code requirements for structural concrete (ACI 318-08) and commentary. American Concrete Institute. [10]Petroski, H. (2012). To forgive design. Harvard University Press. [11]Al-Khafaji, J. M. N. (1980). The effect of size and percentage of tension reinforcement on the behaviour of reinforced concrete (Doctoral dissertation, University of Southampton). [12]Swann, R. A. (1969). Flexural strength of corners of reinforced concrete portal frames.2.)Mayfield , B,Kong,F.K Bennison A. and ,davis ,J.C.D.T. [13]Kemp, E. L., & Mukherjee, P. R. (1968). Inelastic behavior of concrete knee-joints’’. The Consulting Engineer, 44-48. [14]Mayfield, B., Kong, F. K., Bennison, A., & Davies, J. C. T. (1971, May). Corner joint details in structural lightweight concrete. In Journal Proceedings (Vol. 68, No. 5, pp. 366-372). [15]Mukherjee, P. R., & Coull, A. (1972). Free vibrations of coupled shear walls. Earthquake Engineering & Structural Dynamics, 1(4), 377-386. [16] Park, S., & Mosalam, K. M. (2012). Experimental and analytical studies on reinforced concrete buildings with seismically vulnerable beam-column joints. Pacific Earthquake Engineering Research Center.

Tags: