An Experimental Study of Surface Improvement in FDM Parts by Vapor Treatment Process

Source:
By:MAYANK PRAJAPATI, SANDEEP RIMZA

DOI: https://doi.org/10.30564/jmer.v3i1.1681

Abstract:

Fused deposition modeling (FDM) is one of the most adaptable additive manufacturing method owing to the cost-effectiveness and environment-friendly nature. However, FDM technique still possesses major difficulties in terms of poor surface quality because of adding layer by layer manufacturing process for the prototypes. It is desirable to explore an efficient technique for FDM parts to enhance the poor surface quality and dimensions precision. In the present paper, an effort has been made to enhance the surface quality and optimize the critical processing parameter of FDM based benchmark using vapor smoothing process (VSP). A comparative experimental study has been performed by design of experiments (DOE), Taguchi technique to find the influence of input design parameters on the surface finish of benchmark FDM parts. The results of the present investigation show that VSP treatment improves the surface quality of FDM parts to micro level with negligible dimensional variation. It is observed that improved surface quality is found in the 1,2, -Dichloroethane chemical at 90° part build orientation, 0.25 mm layer thickness, 10% fill density and 90 second exposure times.

References:

[1] A. Mitchell, U.Lafont M. HołyńskaC.Semprimoschnig, Additive manufacturing - A review of 4D printing and future applications. [2] N. Hopkinson, R. Hague, P. Dickens. Rapid Manufacturing An Industrial Revolution for the Digital Age, John Wiley & Sons, Chichester, West Sussex, 2005. [3] A. Boschetto, V. Giordano, F. Veniali. International Journal of Advance Manufacturing Technology, 2012, 61: 945–956. [4] T. Wholers, Wohlers report 2006: rapid prototyping & manufacturing state of the industry annual worldwide progress report, Wohlers Associates, Inc. Fort Collins, CO. [5] Kruth JP, Leu MC, Nakagawa T. Progress in Additive Manufacturing and Rapid Prototyping. CIRP Annals - Manufacturing Technology, 1998, 47(2): 525–540. [6] Kruth JP, Levy G, Klocke F, Childs THC. Consolidation Phenomena in Laser and Powder-Bed Based Layered Manufacturing. CIRP Annals – Manufacturing Technology, 2007, 56(2): 730–759. [7] Gebhardt, A.. Understanding Additive Manufacturing. 2012, Carl Hanser Verlag. [8] Daljinder Singh, Rupinder Singh, K.S. Boparai, Ilenia Farina, Luciano Feo, Anita, Kamra Verma. In-vitro studies of SS 316 L biomedical implants prepared by FDM, vapor smoothing and investment casting. Composites Part B, 2017. DOI: 10.1016/j.compositesb.2017.08.019 [9] Siti Nur Humaira Mazlan, Mohd Rizal Alkahari1, Faiz Redza Ramli, Nurul Ain Maidin, MohdNizam Sudin, Ardzatul Ruziah Zolkaply. Surface Finish and Mechanical Properties of FDM Part After Blow Cold Vapor Treatment. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2018, 48(2): 148-155 [10] L.M. Galantucci, F. Lavecchia, G. Percoco. Experimental study aiming to enhance the surface finish of fused deposition modeled parts. CIRP Annals - Manufacturing Technology, 2009, 58: 189–192. DOI: 10.1016/j.cirp.2009.03.071 [11] J.S. Chohan, R. Singh, K.S. Boparai. Parametric optimization of fused deposition modeling and vapour smoothing processes for surface finishing of biomedical implant replicas. Measurement Journal, 2016, 94: 602-613. DOI: https://dx.doil.org/10.1016/j,measurement.2016.09.001 [12] Yifan Jin, Yi Wan, Zhanqiang Liu. Surface polish of PLA parts in FDM using dichloromethane vapour. MATEC Web of Conferences 95, 05001 (2017) ICMME 2016. DOI: 10.1051/matecconf/20179505001 [13] Rupinder Singh, Sunpreet Singh, Iqwinder Preet Singh, Francesco Fabbrocino, 2016. Investigation for surface finish improvement of FDM parts by vapor smoothing process. Composites Part B Engineering 111. DOI: 10.1016/j.compositesb.2016.11.062 [14] Rupinder Singh, Sunpreet Singh, and Iqwinder P. Singh. Effect of Hot Vapor Smoothing Process on Surface Hardness of Fused Deposition Modeling Parts. 3D Printing and Additive Manufacturing 2016, 00(00). DOI: 10.1108/RPJ-02-2014-0017 [15] Ashu Garg, Anirban Bhattacharya, Ajay Batish. Chemical vapor treatment of ABS parts built by FDM: Analysis of surface finish and mechanical strength. Int J Ady Manuf Technol. DOI: 10.1007/s00170-016-9257-1 [16] N. Jayanth, P. Senthil & C. Prakash. Effect of chemical treatment on tensile strength and surface roughness of 3D-printed ABS using the FDM process, Virtual and Physical Prototyping, 2018. DOI: 10.1080/17452759.2018.1449565 [17] Lalehpour, A., Janeteas, C. & Barari, A. Int J Adv Manuf Technol, 2018, 95: 1505. https://doi.org/10.1007/s00170-017-1165-5 [18] I. Gibson, D.W.R., B. Stucker. Additive ManufacturingTechnologies: Rapid Prototyping to Direct Digital Manufacturing. New York: Springer, 2010. [19] Gurpal Singh Bual, Parlad kumar. Methods to Improve Surface Finish of Parts Produced by Fused Deposition Modeling” Manufacturing Science and Technology, 2014, 2(3): 51-55. DOI: 10.13189/mst.2014.020301