Study on the Oil Pipeline Design of R Oil Field

Updata:01-01-1970

Source:
By:qing liu

DOI: https://doi.org/10.30564/frae.v3i3.2453

Abstract:

It’s a compressive article consists of three parts, an overview of pipeline development in China, oil pipeline design for R oilfield and pipeline management suggestions. First, this article introduces the current status of pipeline construction, oil pipeline technology and gas pipeline technology in China in recent years. The current status of China’s pipeline construction is divided into three stages. In terms of construction, pipeline construction is developing in the direction of intelligence and modernization. Long-distance oil pipelines require technical breakthroughs in two aspects. One is the sequential oil product delivery technology to improve the type of oil that can be delivered sequentially; the second is the viscosity reduction delivery technology for heavy oil. Gas transmission pipelines are developing in the direction of high pressure, large diameter and high steel grade. Secondly, based on all the pipeline development above, in order to meet the development of R oil field, an oil-water two-phase pipeline transportation design and a pipeline crossing river design were carried out. Under the condition of the design pressure of the pipeline of 5.5MPa, it is preferable to produce a pipeline of φ219×6.5mm, and the steel grade of the pipeline is L360. A heating station and pumping station are needed in the transportation process, and the heating station and pumping station are combined for one construction. Considering that the strata of the river crossing section are mainly gravel sand layer, clay layer and non-lithological stratum, horizontal directional drilling (HDD) is adopted for river crossing, and suggestions are made for the construction process. Finally, after the pipeline was put into production, the corresponding auxiliary production system and supporting engineering suggestions were put forward.

References:

[1] Lei F., Wang W., Cao Y., Wang F. Leapfrogging China’s Oil and Gas Storage and Transportation Construction Technology and Future Trends[J]. Petroleum Technology Forum, 2016 (3):44-51. [2] Li H., Ji L., Tian W. Significant Technical Progress in the West-East Gas Pipeline Projects in Line One and Line Two[J]. Natural Gas Industry, 2010, 30(4):1-9. DOI: 10.3787/j.issn.1000-0976.2010.0.001 [3] Xiang B. Design Features of West-East Gas Pipeline Project[J]. Petroleum Engineering Construction, 2010 (S1): 1-5. DOI: 10.3969/j.issn.1006-5539.2008.03.001 [4]Yao W. The current situation and development of standardization in oil & gas storage and transportation industry in China[J]. Oil & Gas Storage and Transportation, 2012(6): 416-421. DOI: doi：10.6047/j.issn.1000-8241.2012.06.004 [5]Li J., Wang Y., Li Y. Contamination Control in Batch Transportation of West Oil Product Pipeline[J]. Oil & Gas Storage and Transportation, 2010(2): 110-112. DOI: CNKI:SUN:YQCY.0.2010-02-009 [6]Yang X., Gong J. Study on Contamination Cut and Disposal for Products Pipeline Operated with Batch Transportation[J]. Oil & Gas Storage and Transportation, 2004(4):19-22. DOI: CNKI:SUN:YQCY.0.2004-04-004 [7]Zhang J. Technologies for Pipelining High-Pour-Point and Viscous Crudes and Their Development[J]. Engineering Science, 2002(6):71-76. DOI: CNKI:SUN:GCKX.0.2002-06-013 [8]Zheng Z., Wang S., Wu Y., et al. Relative Technologies to Improve Transportability of Oil and Gas Pipelines[J]. Oil & Gas Storage and Transportation, 2010,29(2), 100-106. DOI: CNKI:SUN:YQCY.0.2010-02-007 [9]Wei X., Liu X., Wang W., et al. Overview on Viscosity Reducing Methods of Heavy Oil[J]. Special Petrochemicals, 2002 (5), 45-48. DOI: 10.3969/j.issn.1003-9384.2002.05.015 [10]Zheng Q. Heavy oil viscosity reduction technology and delivery method[J]. Oil-gas Field Surface Engineering, 2006,25(4), 6-7. DOI: 10.3969/j.issn.1006-6896.2006.04.003 [11] Zhou C., Wu C., Ren S., et al. Outline Heavy Oil Viscosity Methods[J]. Inner Mongolia Petrochemical Industry, 2007,33(4), 128-129. DOI: 10.3969/j.issn.1006-7981.2007.04.066 [12]Xu X., Sun G. Current status and research direction of crude oil processing technology in Tahe Oilfield[J]. Oil-Gasfield Surface Engineering, 2011,30(5), 40-42. DOI: 10.3969/j.issn.1006-6896.2011.5.019 [13] Anhorn J., Badakhshan A. MTBE (methyl t-butylether), a carrier for heavy oil transportation and viscosity mixing rule applicability. Preprints of 43rd Annu. CIM Petrol Soc Tech Meeting , June 1992. [17] Zhao H., Wang Y., Zhao T. Chemical Visbreaking Method of Heavy Oil[J]. Chemical Industry Times, 2005,19(8), 64-66. DOI: 10.3969/j.issn.1002-154X.2005.08.020 [15] Guevara E., Zagustin K., Zublillaga V. Core annular flow: the most economical method for the transportation of viscous hydrocarbons. Proceedings of the 4th UNITAR/ UNDP Conference on Heavy Crude and Tar Sands. Aug, 1998. [16] Dong Y., Sun N., Chen D., et al. Discussion on the resistance characteristics of heavy oil-foam flow in riser. Drilling & Production Technology, 2016,39(5), 52-55. [17] Isaacs J, Speed J. Method of Piping Fluids. US Patent N759374, 1904. [18] Prada J., Jose W., Bannwart A.C. Modeling of Vertical Core-annular Flows and Application to Heavy Oil Production[J]. Journal of Energy Resources Technology, 2001(3), 194-199. DOI: 10.1115/1.1377894 [19]Silva R., Mohamed R., Bannwart A.C. Wettability Alteration of Internal Surfaces of Pipelines for Use in The Transportation of Heavy Oil via Core-flow[J]. Journal of Petroleum Science and Engineering, 2006,51(1), 17-25. DOI: 10.1016/j.petrol.2005.11.016 [20] Huang Y., Liu H., Wang Z. Calculation of Microbubble Sheet Drag Reduction of Plate by Model of Boundary Layer[J]. Journal of Ship Mechanics, 2003 7(6), 6-13. [21] Mccormick M.E., Bhattacharyya R. Drag Reduction of a Submersible Hull by Electrolysis[J]. Naval Engineers Journal, 1973 (85), 11-16. DOI: 10.1111/j.1559-3584.1973.tb04788.x [22]Ortiz-Villafuerte J., Hassan Y.A. Investigation of Microbubble Boundary Layer Using Particle Tracking Velocimetry[J]. Journal of Fluids Engineering, 2006,128(3), 507-519. DOI: https://doi.org/10.1115/1.2174062 [23]Jing J., Dai K., Li Y., et al. New Ideas of Drag Reduction for Heavy Oil Flow Using Aqueous Foam[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2013,35(3), 174-182. DOI: 10.3863/j.issn.1674-5086.2013.03.025 [24] API SPEC 5L 44th-2007. Specification for line pipe. Washington D.C.: API publishing services, 2007,10. [25] Xia D., Wang X., Li X. et al. Properties and Microstructure of Third Generation X90 Pipeline Steel[J]. Acta Metallurgica Sinica, 2013,49(3), 271-276. DOI: 10.3724/sp.j.1037.2012.00480 [26]Qian Y., Xiao W., Liu L., et al. Development and Trial Production of X90M Pipeline Steel with Large Diameter[J]. Welded Pipe and Tube, 2014 37(1), 22-26. DOI: 10.3969/j.issn.1001-3938.2014.01.005 [27]Yang F., Luo J., Li H., Guo Y., Feng J. Constitutive Law and Fracture Criteria of X90 Ultrahigh-Strength Gas-Transmission Steel Pipe Material[J]. Acta Petroleum Sinica, 2017 ,38(1), 112-118. DOI: 10.7623/syxb201701013 [28] ASME. ASME B31.8. Gas Transmission and Distribution Piping System[M]. New York: ASME, 2010. [29] Wu H., Luo J., Zhang D. Hydrostatic Testing Pressure Determination of the Test Pipe Section with a 0.8 Design Factor in The West-to-East China Gas Pipeline[J]. Natural Gas Industry, 2013(8), 1-6. DOI: 10.3787/j.issn.1000-0976.2013.08.018 [30] Yang X. Design and management of oil pipeline[M].Dongying:Petroleum University Press, 1996. [31] Zong Y., Wu L., Yang W., et al. Comparison of Process Design of Oil Pipeline between China and North America. Oil-Gasfield Surface Engineering, 2014(3), 48-49. DOI: 10.3969/j.issn.1006-6896.2014.3.029.

Tags: