The Role of Geotechnical Engineering in Photovoltaic Solar Photovoltaic Energy in Arid Climate Regions

Source:
By:Abdulla AL-Rashidi

DOI: https://doi.org/10.30564/frae.v5i1.4244

Abstract:

The photovoltaic solar energy is comprised of many engineering disciplines. Geotechnical engineering is one of those disciplines in which it has important functions in the solar photovoltaic technology and particularly for large scale projects which usually employed in open areas such as parks or deserts. The aim of this paper is to present in depth the role of the geotechnical engineering in the solar photovoltaic energy and clarifying the common challenges facing this technology in arid climate regions. It is found that the lack of specialised codes and specifications that needed for foundation design and in selecting the proper foundation types. This would significantly affect the development of this technology in terms of efficiency and performance of the proposed solar photovoltaic systems. The hot weather climate and induced stresses by wind speed are also critical issues that should be considered. In order to avoid the uncertainty of data such as soil properties, the use of numerical modelling techniques is an effective method to help determining the most proper parameters needed for design and analyse purposes.

References:

[1] Gevorkian, P., 2014. Large scale solar power systems. Cambridge University Press. Reprint edition (6 Mar. 2014). [2] IEA, Renewables 2018. Analysys and Forecasts to 20123, 2018. (Online). Available: https://webstore.iea.org/download/summary/2312?fileName=English-Renewables-2018-ES.pdf. [3] Al-Rashidi, A., 2019. A Technical, Economic and Environmental Evaluation Study of Utilising Fixed, Single and Dual-Axis Solar Photovoltaic Systems in Boubyan and Failaka Islands in Kuwait. American Journal of Engineering and Applied Sciences. 12(4), 495-502. DOI: https://doi.org/10.3844/ajeassp.2019.495.502 [4] Al-Rashidi, A., 2019. Feasibility Study of Utilising 1 MW Grid Connected Solar Photovoltaic System in Boubyan and Failaka Islands. Iape ’19. [5] Al-Rashidi, A., 2017. Investigating the Feasibility of Solar Photovoltaic Systems in Kuwait. Loughborough University. [6] Mendes, B., Ntambakwa, E., Rogers, M., et al., 2020. Common Geotechnical Design Challenges for Solar Power Plant Development in the USA and Canada. GGeo-Congress 2020: Geotechnical Earthquake Engineering and Special Topics. pp. 898-906. [7] Ntambakwa, E., Yu, H., Guzman, C., et al., 2016. Geotechnical Design Considerations for Onshore Wind Turbine Shallow Foundations. Geotechnical and Structural Engineering. pp. 1153-1165. DOI: https://doi.org/10.1061/9780784479742.096 [8] Lates, M.T., 2008. Mechanical Behavior Analysis with the Finite Elements Method of Solar Collector’s Tracking Systems. WSEAS Transactions on Applied and Theoretical Mechanics. 3(7), 244-253. [9] AL-Rashidi, A., 2020. Structural stability and fatigue assessments of dual-axis solar trackers using finite elements analysis Abdulla. International Journal of GEOMATE. 19(73), 8-13. [10] Jubayer, C.M., Hangan, H., 2014. Numerical simulation of wind effects on a stand-alone ground mounted photovoltaic (PV) system. Journal of Wind Engineering & Industrial Aerodynamics. 134, 56-64. DOI: https://doi.org/10.1016/j.jweia.2014.08.008 [11] Ferroudji, F., Ouattas, T., Khélifi, C., 2013. Design, Modeling and Finite Element Static Analysis of a New Two Axis Solar Tracker Using SolidWorks/COSMOSWorks. 3rd International Conference on Electrical Engineering and Applications. 446-447, 738-743. [12] Lin, C.K., Dai, C.Y., Wu, J.C., 2013. Analysis of structural deformation and deformation-induced solar radiation misalignment in a tracking photovoltaic system. Renewable Energy. 59, 65-74. [13] Ferroudji, F., Outtas, T., Khélifi, C., et al., 2014. Large-scale dual axis sun tracking system modeling and static analysis by FEM. International Journal of Mechanical & Mechatronics. 14(4), 92-97. [14] Aly, A.M., Bitsuamlak, G., 2013. Aerodynamics of ground mounted solar panels: Test model scale effects. Journal of Wind Engineering & Industrial. 123, 250-260. DOI: http://dx.doi.org/10.1016/j.jweia.2013.07.007 [15] Bezawada, H.V., Sekhar, A.S., Reddy, K.S., 2014. Design and Analysis of Dual Axes Tracking System for Solar Photovoltaic Modules. 2(3), 3181-3189. [16] Nithya, 2017. Solar tracker market expected to grow. http://evolveindia.in/blog/2015/10/24/solar-tracker-market-expected-to-grow/ (Accessed Jan. 12, 2017). [17] Department of Transport and Main Roads, 2016. Geotechnical Borehole Logging. Available: https://www.tmr.qld.gov.au/-/media/busind/techstdpubs/Geotechnica/Geotech-Borehole-Logging/Geotechnical-Borehole-Logging.pdf?la=en. [18] Liu, J., Zha, F., Xu, L., et al., 2019. Mechanism of stabilized/solidified heavy metal contaminated soils with cement-fly ash based on electrical resistivity measurements. Measurement. 141,85-94. [19] ASTM, D., 2018. Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils. [20] ASTM, G., 2012. Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method. [21] ASTM, D., 1994. Standard Test Method for Bearing Capacity of Soil for Static Load and Spread Footings. [22] ASTM, D., 2012. Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils. [23] ASTM, D., 2007. Standard Test Method for Particle-Size Analysis of Soils. West Conshohocken, PA. Available: www.astm.org. [24] ASTM, D., 2019. Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass. West Conshohocken, PA. Available: www.astm.org. [25] ASTM D6683-19, 2019. ASTM D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress. [26] ASTM D4318-17e1, 2017. Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. [27] ASTM, D., 2011. Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions. [28] ASTM, D., 2020. Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils. [29] ASTM, D., 2003. Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter. [30] BSI Standards Publication, 1990. Methods of test for soils for civil engineering purposes. Milton Keynes, UK. [31] Lutenegger, A.J., 2016. Foundation Alternatives for Ground Mount Solar Panel Installations. Geotechnical and Structural Engineering Congress 2016 - Proceedings of the Joint Geotechnical and Structural Engineering Congress 2016. pp. 1873-1885. [32] Miller, L.J., 2009. Keeping Solar Panels Secure on Unstable Ground. Oldcastle Precast, Inc. www.Oldcastleprecast.com/energy (Accessed Nov. 26, 2014). [33] Kibriya, T., 2013. Construction Issues Faced By Renewable Energy Production Facilities - Solar PV Farms in Ontario. Stand. Sci. Res. Essays. 1(14), 391-397. [34] Worden, A., 2014. Foundation Selection For Ground Mounted PV Solar Systems. http://www.solarpowerworldonline.com/2014/07/white-paper-foundation-selection-ground-mounted-pv-solar-systems/ (Accessed Feb. 12, 2014). [35] Nabizadeh, F., Choobbasti, A.J., 2017. Field Study of Capacity Helical Piles in Sand and Silty Clay. Transportation Infrastructure Geotechnology. 4(1), 3-17. DOI: https://doi.org/10.1007/s40515-016-0036-0 [36] Lutenegger, A., 2019. Foundations for Elevated Ground Mount Solar Panel Photovoltaic (pv) Systems. [37] Thurston, C., 2015. Ensuring Your Solar Array Doesn’t Get Caught in the Wind. https://www.renewableenergyworld.com/2015/07/20/ensuring-your-solar-array-doesn-t-get-caught-in-the-wind/ (Accessed Mar. 01, 2020). [38] Das, B.M., 1999. Principles of Foundation Engineering,Fourth edi. Cole Publishing Company. [39] Al-Rashidi, A., El-Hamalawi, A., 2016. A Performance Study of Fixed, Single-Axis and Dual-Axis Photovoltaic Systems in Kuwait. International Journal of Energy and Power Engineering. 10(9), 1096 1100. Available: https://waset.org/publications/10005376/a-performance-study-of-fixed-single-axis-and-dual-axis-photovoltaic-systems-in-kuwait. [40] American Society of Civil Engineers (ASCE), 2013. By Authority Of, vol. 552. [41] IRONRIDGE, 2018. Ground-Based System. https://www.ironridge.com/ground-based/ (Accessed Apr. 12, 2020). [42] Abbo, A.J., Sloan, S.W., 1995. A smooth hyperbolic approximation to the Mohr-Coulomb yield criterion. Computers & Structures. 54(3), 427-441. DOI: https://doi.org/10.1016/0045-7949(94)00339-5 [43] El-Hamalawi, A., 2002. Lecture notes. [44] Öztekin, E., Pul, S., Hüsem, M., 2016. Experimental determination of Drucker-Prager yield criterion parameters for normal and high strength concretes under triaxial compression. Construction and Building Materials. 112, 725-732. DOI: https://doi.org/10.1016/j.conbuildmat.2016.02.127