Optimization Model and Pollution Treatment of Sintering Ore Distribution

Source:
By:Yibo Wang, Hao Yue, Huibo Wang

DOI: https://doi.org/10.30564/jbms.v2i1.2718

Abstract:

sintering process plays an important role in iron and steel smelting process. The subsequent production of blast furnace ironmaking is directly affected by the quality of sinter. Among them, the proportion of raw materials and the advanced degree of sintering process are the two main factors affecting the quality of sinter. Because the control parameters of sintering process are too many and the physical and chemical process is too complex, it is difficult to establish and control the model accurately. Therefore, workers have long relied on experience to set temperature and other factors to engage in production, resulting in the quality of sinter is unstable, the cost is not easy to be controlled. Moreover, the flue gas produced in the sintering process will have different effects on the environment. Through the data analysis of the ore distribution scheme and the results of the physicochemical analysis of sinter in a steel plant, two aspects of the work are completed: one is to establish the optimal model of the cost of the sintering process, and the most suitable temperature for the sintering process. The second is the analysis of harmful components produced in sintering process.

References:

[1]Jie Wang,Wenqi Zhong.Simultaneous desulfurization and denitrification of sintering flue gas via composite absorbent[J]. Chinese Journal of Chemical Engineering,2016,24(8)：1104-1111. [2] Pan Yuzhu, Liu Zhenggen, Chu Mansheng, Gao Lihua, Tang Jue. Optimization of Sintering Matching Model [J].] Based on Sintering Basic Characteristics Proceedings of the Twelfth Annual Conference of China Iron and Steel ,2017. [3] Pan Yuzhu, Liu Zhenggen, Chu Mansheng, Gao Lihua, Tang Jue. Optimization of Sintering Matching Model [J].] Based on Sintering Basic Characteristics Proceedings of the Twelfth Annual Conference of China Iron and Steel ,2017. [4] Yang Guang, Zhang Shuhui, Yang Yanshuang. Current Status and Prospect of Emission Reduction Technology for Gaseous Pollutants in J]. Flue Gas Comprehensive utilization of mineral resources ,2019. [5] Chen Kaihua. Formation Mechanism and Control of Sulfur Dioxide during J]. of Iron Ore Sintering Sintered pellets ,2007,32(4):13-17. . Present situation of pollutant treatment technology in sintering flue gas of [6] Zhang Pu J]. Wang Hui B12：1.,2017, World Metal Bulletin SO of sintering process [7] Long Hongming, Zhang Xiangyang, Li Jiaxin, etc. 2Feasibility Study on Emission Characteristics and Process Desulfurization [J].] of Journal of Process Engineering ,2015,(2):230-235. . [8] Study on the Effect of Main Process Parameters of Su Yudong Sintering on NOx Emission in Flue Gas [D].]; and Shanghai: Shanghai Jiaotong University ,2014. . [9] Study on the Effect of Main Process Parameters of Su Yudong Sintering on NOx Emission in Flue Gas [D].]; and Shanghai: Shanghai Jiaotong University ,2014. [10] Jiang Lizhen, Hu Mingyi, et al. Control of Desulfurization by Wet Sintering of Lime and Gypsum [J].]; and Henan Metallurgy ,2018,26(5):26-28. [11] Xue Jianming, Wang Xiaoming, Liu Jianmin, et al. Manual for Design and Equipment Selection of Wet Flue Gas Desulfurization [M].] and Beijing: China Electric Power Press ,2011. [12]Rada E C ,Ragazzi M ,Panaitescu V ,etc .The role of bio-mechanical treatments of waste in the dioxin emission inventories[J]. Chemosphere,2006,62(3)：404-410. [13]Paul Maina,Makame Mbarawa.Investigating effects of zeolites as an agent to improve limestone reactivity toward flue gas desulfurization[J]. Energy &Fuels,2011,25：2028-2038.