Design of Multi-gas Monitoring Device for Indoor Air Quality

Updata:01-01-1970

Source:
By:Author(s)

DOI: https://doi.org/10.30564/jeis.v5i1.5390

Abstract:

Besides the need for low-cost instruments for air pollution measurement and detection, nowadays there are many concerns about air pollution due to the fast changes and used technologies. This research was applied using an MQ2 gas detector, and microcontroller/Arduino-Uno. The design steps included bonding and connecting readymade sensors, coding, and finally testing the device. Testing has been conducted in Environment and Pollution Engineering Department laboratories, at the Technical Engineering College of Kirkuk. This study proposed the use of an MQ2 sensor for multi-gas rate detection which can exist indoors. The system uses also a DHT22 sensor for measuring environment temperature and humidity. The sensors are connected to Arduino and LCD to present data on LCD by powering the system with external power. Overall, the testing was conducted, and the device served as a measuring tool for indoor air as an accurate multigas rate detector.

References:

[1]Spengler, J.D., Sexton, K., 1983. Indoor air pollution: A public health perspective. Science. 221(4605), 9-17. DOI: https://www.science.org/doi/abs/10.1126/science.6857273. [2]Pitarma, R., Marques, G., Ferreira, B.R., 2017. Monitoring indoor air quality for enhanced occupational health. Journal of Medical Systems. 41(2), 1-8. DOI: https://doi.org/10.1007/s10916-016-0667-2 [3]Abraham, S., Li, X., 2014. A cost-effective wireless sensor network system for indoor air quality monitoring applications. Procedia Computer Science. 34, 165-171. DOI: https://doi.org/10.1016/j.procs.2014.07.090 [4]Kumar, P., Skouloudis, A.N., Bell, M., et al., 2016. Real-time sensors for indoor air monitoring and challenges ahead in deploying them to urban buildings. Science of the Total Environment. 560, 150-159. DOI: https://doi.org/10.1016/j.scitotenv.2016.04.032 [5]Brilli, F., Fares, S., Ghirardo, A., et al., 2018. Plants for sustainable improvement of indoor air quality. Trends in Plant Science. 23(6), 507-512. DOI: https://doi.org/10.1016/j.tplants.2018.03.004 [6]Bruce, N., Perez-Padilla, R., Albalak, R., 2000. Indoor air pollution in developing countries: A major environmental and public health challenge. Bulletin of the World Health Organization. 78, 1078-1092. [7]Samet, J.M., Marbury, M.C., Spengler, J.D., 1987. Health effects and sources of indoor air pollution. Part I. American Review of Respiratory Disease. 136(6), 1486-1508. DOI: https://doi.org/10.1164/ajrccm/136.6.1486 [8]Smith, K.R., 2002. Indoor air pollution in developing countries: Recommendations for research. Indoor Air. 12(3), 198-207. [9]Jumaah, H.J., Ameen, M.H., Kalantar, B., et al., 2019. Air quality index prediction using IDW geostatistical technique and OLS-based GIS technique in Kuala Lumpur, Malaysia. Geomatics, Natural Hazards and Risk. 10(1), 200-207. DOI: https://doi.org/10.1080/19475705.2019.1683084 [10]Piedrahita, R., Xiang, Y., Masson, N., et al., 2014. The next generation of low-cost personal air quality sensors for quantitative exposure monitoring. Atmospheric Measurement Techniques. 7(10), 3325-3336. [11]Jumaah, H.J., Kalantar, B., Halin, A.A., et al., 2021. Development of UAV-based PM 2.5 monitoring system. Drones. 5(3), 60. DOI: https://doi.org/10.3390/drones5030060 [12]Karagulian, F., Barbiere, M., Kotsev, A., et al., 2019. Review of the performance of low-cost sensors for air quality monitoring. Atmosphere. 10(9), 506. DOI: https://doi.org/10.3390/atmos10090506 [13]Jualayba, M., Regio, K., Quiozon, H. (editors), et al., 2018. Hazardous gas detection and notification system. Proceedings of IEEE 10th International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM); 2018 Nov 29—Dec 2; Baguio City, Philippines. USA: IEEE. p. 1-4. DOI: https://doi.org/10.1109/HNICEM.2018.8666358 [14]Kamelia, L., Ismail, N., Firmansyah, A.A., 2019. Fire disaster early detection system in residential areas. Journal of Physics: Conference Series. 1402(4). DOI: https://doi.org/10.1088/1742-6596/1402/4/044001 [15]Bogdan, M., 2018. Gas detector using Arduino and LabVIEW. Proceedings of the 13th International Conference on Virtual Learning ICVL.315-318. [16]Villa, T.F., Salimi, F., Morton, K., et al., 2016. Development and validation of a UAV based system for air pollution measurements. Sensors. 16(12), 2202. [17]Waworundeng, J.M.S., 2018. Prototype of gas detector with IoT platform for notification and monitoring system. Abstract Proceedings International Scholars Conference. 6(1), 160. Available from: https://jurnal.unai.edu/index.php/isc/article/view/1243 [18]Srinivas, C., Ch, M.K., 2017. Toxic gas detection and monitoring utilizing Internet of things. International Journal of Civil Engineering and Technology. 8(12), 614-622. [19]Heyasa, B.B.L., Van Ryan Kristopher, R.G., 2017. Initial development and testing of microcontroller-MQ2 Gas sensor for university air quality monitoring. IOSR Journal of Electrical and Electronics Engineering. 12(3), 47-53. Available from: https://scholar.google.com.hk/scholar?hl=zh-CN&as_sdt=0%2C5&q=Initial+development+and+testing+of+mi%02crocontroller-MQ2+Gas+sensor+for+university++air+quality+monitoring.&btnG= [20]Villa, T.F., Gonzalez, F., Miljievic, B., et al., 2016. An overview of small unmanned aerial vehicles for air quality measurements: Present applications and future prospectives. Sensors. 16(7), 1072. [21]Maag, B., Zhou, Z., Thiele, L., 2018. W-air: Enabling personal air pollution monitoring on wearables. Proceedings of the ACM on Interactive, Mobile, Wearable and Ubiquitous Technologies. 2(1), 1-25. [22]Thamaraiselvi, D., 2020. Envionment monitoring system using IoT. Mukt Shabd Journal. 9(5), 915-920. [23]Last Minute Engineers. How MQ2 Gas/Smoke Sensor Works? & Interface it with Arduino [Internet] [cited 2021 Mar 7]. Available from: https://lastminuteengineers.com/mq2-gas-senser-arduino-tutorial/. [24]ELPROCUS. MQ2 Gas Sensor—Working Principle & Its Applications [Internet] [cited 2021 Mar 7]. Available from: https://www.elprocus.com/an-introduction-to-mq2-gas-sensor/. [25]Krishnamoorthy, R., Krishnan, K., Bharatiraja, C., 2021. Deployment of IoT for smart home application and embedded real-time control system. Materials Today: Proceedings. 45, 2777- 2783. DOI: https://doi.org/10.1016/j.matpr.2020.11.741 [26]Jayakumar, D., Ezhilmaran, R., Balaji, S., et al., 2021. Mobile based gas leakage monitoring using IOT. Journal of Physics: Conference Series. 1717(1), 12068. [27]Devi, K.I., Meivel, S., Kumar, K.R., et al., 2021. A survey report of air polluting data through cloud IoT sensors. Materials Today: Proceedings. Available from: https://linkinghub.elsevier.com/retrieve/pii/S2214785320403384. [28]Setiawan, F.N., Kustiawan, I., 2018. IOT based air quality monitoring. IOP Conference Series: Materials Science and Engineering. 384(1), 12008. [29]Last Minute Engineers. Interface Itwith Arduino [Internet] [cited 2021 Mar 7]. Available from: https://lastminuteengineers.com/dht11-dht22-arduino-tutorial/.

Tags: