A Study of Challenges and Benefits of Lean Construction (LC) Principles in Omani Construction Industry

Source:
By:Raj Kapur Shah, Khalifa Al Shereiqi, Fiona Borthwick

DOI: https://doi.org/10.30564/jcr.v2i2.2760

Abstract: There are frequent failures in the project delivery in time and increasing the waste in Oman construction industry. Lean Construction (LC) principles which is lean thinking in design and construction process may be a possible solution. Hence, the paper is aimed on exploring the status of the LC practices and its impact on Omani Construction Industry (OCI). The paper presents barriers, potential benefits, and the measures of suitability and acceptability of LC principles. A quantitative research approach was adopted and research data was collected using an online questionnaire survey in Oman. The data was analysed and results are presented in tables and charts followed by critical discussions. The survey found that one-third of the construction professionals have a good awareness and half of then having a higher level awareness about LC practices. More than one third of the construction organisations are adopting LC principles with a high consensus on the suitability and acceptability, and they recognised that time commitment are necessary for the successful implementation and achieve benefits. The study concludes that the reduction in project delivery time and construction at site waste is the key advantage of implementing LC priciples in design and construction stages in the omani construction industry. References:

[1] Abduh, M., and Roza, H. (2006). Indonesian Contractors' Readiness towards Lean Construction. Santiago, Chile: 14th Annual Conference of the International Group for Lean Construction. [2] Al Nuaimi, A., and Al Muohsin, M. (2013). Causes of delay in completion of construction projects in Oman. Bankok, Thailand: International conference on innovation in engineering and technology ICIET 2013. [3] Alinaitwe, H. (2009). Prioritising Lean Construction Barriers in Uganda's Construction Industry. Journal of Construction in Developing Countries, 14(1), 15-30. [4] Al Sehaimi, A., Tzortzopoulos, P., and Koskela, L. (2007). Last Planner System: Esperiences from pilot implementation in the Middle East. Taipei, Taiwan: IGLC. [5] Arbulu, R., Tommelein, I., Walsh, K., and Hershauer, J. (2003). Value stream analysis of a re-engineered construction supply chain. Building Research and Information, 31 (2), pp161–171. [6] Ballard, G. (1994). The Last Planner. Retrieved 5 25, 2016, Available [online] at http://www.leanconstruction.org/ [7] Ballard, G. (2000). The Last Planner System of Production Control. Birmingham: School of Civil Engineering, Faculty of Engineering, the University of Birmingham. [8] Ballard, G. (2006). Rethinking project definition in terms of target costing. Santiago, Chile: 14th Annual Conference on Lean Construction, IGLC. [9] Ballard, G., and Howell, G. (1997). Toward Construction JIT. In L. Alarcon (Ed.), Lean Construction (pp. 304 - 312). Rotterdam: A. A. Balkima. [10] Bidarianzadeh, G., and Fortune, C. (2002). Lean Thinking and the Delivery of Sustainable Construction Projects. University of Northumbria: Association of Researchers in Construction Management (ARCOM). [11] Björnfot, A., and Stehn, L. (2007). Value Delivery through Product Offers: A Lean Leap in Multi-Storey Timber Housing Construction. Lean Construction Journal, 3(1), Pp33-45. [12] Cano, S., Delgado, J., Botero, L., and Rubiano, O. (2015). Barriers and success factors in Lean Construction’s implementation. Perth, Australia: 23rd Ann. Conf. of the Int’l. Group for Lean Construction. [13] CBO: Central Bank of Oman (2016). Publication and Statistics. [Online] at http://www.cbo-oman.org. [14] Dulaimi, M., and Tanamas, C. (2001). The Principles and Applications of Lean construction in Singapore. Singapore, Singapore: 9th Annual Conference of the International Group for Lean Construction. [15] Emmitt, S., Sander, D., and Christofferse, A. (2004). Implementing value through lean design management. Sydney, Australia: IGLC - 13. [16] Forbes, L., Ahmed, S., and Barcala, M. (2002). Adapting lean construction theory for practical application in developing countries. Stellenbosch: First CIB W107 International Conference: Creating a Sustainable Construction Industry in Developing Countries. [17] Gaio, J., and Cachadinha, N. (2011). 'Suitability and Benefits of Implementing Lean Production on Road Works. Lima, Peru: 19th Annual Conference of the International Group for Lean Construction. [18] Garnett, N., Jones, D., and Murray, S. (1998). Strategic Application of Lean Thinking. Guaruja, Brazil: IGLC-6. [19] Huovila, P. and Koskela, L. (1998). Contribution of the Principles of Lean Construction to Meet the Challenges of Sustainable Development. International Group of Lean Construction (IGLC). [20] Issa, U. (2013). Implementation of lean construction techniques for minimizing the risks effect on project construction time. Alexandria Engineering Journal, 52, 697–704. [21] Jadhav, J., Mantha, S, and Rane, S. (2014). Exploring barriers in lean implementation. International Journal of Lean Six Sigma, 5(2), 122-148. [22] Koranda, C., Chong, W., Kim, C., Chou, J., and Kim, C. (2012). An Investigation of the Applicability of Sustainability and Lean Concepts to Small Construction Projects. Journal of Civil Engineering, 16(5), 699-707. [23] Koskela, L. (2000). An exploration towards a production theory and its application to construction, PhD thesis. Helsinki: Technical Research Centre of Finland-VTT. [24] Koskela, L., and Ballard, G. (2012). Is production outside management? Building Research and Information, 40(6), 724-737. [25] Koskela, L., Howell, G., Ballard, G., and Tommelein, I. (2002). The foundations of lean construction. In R. and. Best (Ed.), Design and Construction: Building in Value, (pp. 211-226). Sydney, AU. [26] LCI (2016). What is Lean Design and Construction? Retrieved 5 10, 2016, from http://www.leanconstruction.org/about-us/what-is-lean-construction/ [27] Lima, M., Rolim, L., and Alves, T. (2010). Value stream mapping of the architectural executive design in a governmental organization. Haifa, Israel: IGLC. [28] Mossman, A. (2009). Creating value: a sufficient way to eliminate waste in lean design and lean production. Waste in lean design and lean production, pp13- 23. [29] Nahmens, I., and Ikuma, L. (2009). An Empirical Examination of the Relationship between Lean Construction and Safety in the Industrialized Housing Industry. Lean Construction Journal, pp1-12. [30] Nahmens, I., and Ikuma, L. (2012). Effects of Lean Construction on Sustainability of Modular Homebuilding. American Society of Civil Engineers. [31] Olatunji, J. (2008). Lean-in- Nigerian Construction: State, Barriers, Strategies and “Go-Togemba” Approach. Manchester, UK: 16th Annual Conference of the International Group for Lean Construction. [32] Salem, O., Genaid, A., Luegring, M., Paez, O., and Solomon, J. (2004). The Path from Lean Manufacturing to Lean Construction: Implementation and Evaluation of Lean Assembly. Helsingør, Denmark: International Group of Lean Construction (IGLC). [33] Salem, O., Pirzadeh, S., Ghorai, S., and Abdelrahim, A. (2014). Reducing Environmental, Economic, and Social Impacts of Work-zones by Implementing Lean Construction Techniques. Oslo, Norway: 22nd Annual Conference of the International Group for Lean Construction. [34] Salem, O., Solomon, J., Genaidy, G., and Luegring, M. (2005). Site Implementation and Assessment of Lean Construction Techniques. Lean Construction Journal, 2(2), pp1-21. [35] Senaratne, S., and Wijesiri, D. (2008). Lean Construction as a Strategic Option: Testing its Suitability and Acceptability in Sri Lanka. Lean Construction Journal, Pp34-48. [36] Shang, G., and Pheng, L. (2014). Barriers to lean implementation in the construction industry in China. Journal of Technology Management in China, 9(2), 155-173. [37] The World Bank. (2015). Retrieved 2 08 2016, Available [online] at http://data.worldbank.org/indicator/NY.GDP.MKTP.CD