Tetrahydro-dibenzo[a,d] Annulene-5, 11-Dihydrazone and Magnesium Oxide Used to Control the Corrosion of Aluminium in Chloride Ions Environment

Source:
By:Rajesh Kumar Singh, Jay Prakash, Dharmendar Kumar

DOI: https://doi.org/10.30564/jmmr.v3i2.2403

Abstract:

Chloride ions interact with aluminium in marine atmosphere to form corrosion cell. Due to this corrosion reaction occurs on their surface, aluminium is oxidized into Al3+. The corrosion reaction accelerates deterioration in metal and it produces galvanic, pitting, stress, crevice, intergranular corrosion. Chloride ions decrease internal and external strength of aluminium metal. It is a very important metal so used in different appliances for e.g. road, water, air transports, housing, railways and other fields. Nanocoating and electrospray techniques used to check the corrosion of aluminium metal. For nanocoating and electrospray materials applied tetrahydro-dibenzo[a,d] [7] annulene-5, 11-dihydrazone and MgO. Both materials formed composite barrier and developed a passive surface for Cl- ions. This barrier reduced the corrosion rate of aluminium. Nozzle spray and chemical vapour deposition technique used for coating process. The corrosion rate of metal was determined by gravimetric method. Corrosion potential and current density were calculated by potentiostat. The composite barrier formation was confirmed by activation energy, heat of adsorption, free energy, enthalpy and entropy. These thermal parameters were obtained by Arrhenius equation, Langmuir isotherm and Transition state equation. The adsorption of tetrahydro-dibenzo[a,d] [7] annulene-5,11-dihydrazone and MgO electrospray on aluminium surface was depicted by Langmuir, Frundlich and Temkin isotherm. The results of surface coverage area and coating efficiency were noticed that both materials were mitigated the corrosion rate of aluminium in chloride ions environment

References:

[1] R K Singh, Noor Alam. Study the corrosion & corrosion protection of brass sculpture by atmospheric pollutants in winter season. Modern Approach on Material Science, 2019, 1(3): 54-62. [2] Szabo T, Molnar-Nagy L, Telegdi J. Self-healing microcapsules and slow release microspheres in paints. Progress in Organic Coatings, 2011, 72: 52-57. [3] Videla H., L K Herrera. Understanding microbial inhibition of corrosion. Electrochem Acta, 2009, 39: 229-234. [4] R K Singh. Corrosion protection of transport vehicles by nanocoating of Dechydrobenzo annulene-5,10-dihydrazone in corrosive environments and weather change. Journal of Powder Metallurgy and Mining, 2017, 6(1) 1-8. [5] Wen N T, Lin C S, Bai C Y, Ger M D. Structures and characteristics of Cr (III) based conversion coatings on electrogalvanized steels. Surf. Coat Technol, 2008, 203: 317. [6] Boerio F J, Shah P. Adhesion of injection molded PVC to steel substrates, J of Adhesion, 2005, 81(6): 645-675. [7] R K Singh, Manjay K Thakur, Sabana Latif. Mild Steel corrosion control by nanocoating and filler compounds in hostile environments. J of J Material Science, 2018, 4(3): 1-12. [8] Deveci H, Ahmetti G, Ersoz M. Modified styrenes: Corrosion physico-mechanical and thermal properties evaluation. Prog. Org. Coat. 2012, 73: 1-7. [9] Genzer J. Templating Surfaces with Gradient Assemblies. J of Adhesion, 2005, 81: 417-435. [10] Leon-Silva U, Nicho M E. Poly(3-octylthiophhene) and polystyrene blends thermally treated as coating for corrosion protection of stainless steel 304. J. Solid State Electrochem, 2010, 14: 1487-1497. [11] Baier R E. Surface behaviour of biomaterials: Surface for biocompatibility. J. Mater. Sci. Mater. Med., 2006, 17: 1057-1062. [12] R K Singh. Corrosion protection of transport vehicles by nanocoating of decahydrobenzo annulene-5,10-dihydrazone and SiC filler in H2O, O2 (moist), CO2, SO2 environments and weather change. Journal of Metallurgy and Materials Science, 2016, 58:, 167- 179. [13] Rao BVA, Iqbal M Y, Sreehar B. Electrochemical and surface analytical studies of the self assembled monolayer of 5-methoxy-2-(octadeclthiol) benzimidazole in corrosion protection of copper. Electrochim, Acta, 2016, 55 620-631. [14] Liu X Y, Ma H Y, Hou M Z. Self-assembled monolayers of stearic imidazoline on copper electrodes detected using electro chemical measurement, XPS, molecular simulation and FTIR. Chinese Sci. Bull., 2009, 54: 374-381. [15] Liao Q Q, Yue Z W, Zhou Q. Corrosion inhibition effect of self-assembled monolayers of ammonium pyrrolidine dithiocarbamate on copper. Acta Phys. Chin. Sin., 2009, 25: 1655-1661. [16] Zhang D Q, He X M, Kim G S. Arginine self-assembled monolayers against copper corrosion and synergitic effect of iodide ion. J. Appl. Electrochem, 2009, 39: 1193-1198. [17] Ghareba G S, Omanovic S. Interaction of 12-aminododecanoic acid with a carbon steel surface: Towards the development of “green” corrosion inhibitors. Corrosion Sci., 2010, 52: 2104-2113. [18] Sahoo R R, Biswas S K. Frictional response of fatty acids on steel. J. Colloid Interf. Sci., 2009, 333: 707- 718. [19] Raman R, Gawalt E S. Selfassembled monolayers of alkanoic acid on the native oxide surface of SS316L by solution deposition. Langmuir, 2007, 23: 2284- 2288. [20] R K Singh. Building materials corrosion control by fiber reinforced polymers. Journal of Powder Metallurgy and Mining, 2015, 4(2): 1-5. [21] Li D G, Chen S H, Zhao S Y. The corrosion Inhibition of the self-assembled Au and Ag nanoparticles films on the surface of copper. Colloid. Surface A, 2006, 273: 16-23. [22] Cristiani P, Perboni G, Debenedetti A. Effect of chlorination on the corrosion of Cu|Ni 70|30 condenser tubing. Electrochim. Acta, 2008, 54: 100-107. [23] Cristiani P. Solutions fouling in power station condensers. Appl. Therm. Eng., 2005, 25: 2630-2640. [24] R K Singh, Rajeev Kumar. Study corrosion and corrosion protection of stainless steel in phosphate fertilizer industry, American Journal of Mining and Metallurgy, 2014, 2: 27-31.