Producing High Purity Nickel Metal Powder from Nickel Wastes through Acidic Leaching by Sulfuric Acid

Updata:01-01-1970

Source:
By:Authors

DOI: https://doi.org/10.30564/jmmr.v5i2.4877

Abstract:
Nickel has found increasing application in electronic, automobile
manufacturing, plating, and metal industries and so on. Producing high
quality metal powders to satisfy increasing demand for advanced materials
is of very high importance. There are a few numbers of standard powder
production techniques. An acidic leaching has been applied in present
research. Sulfuric acid has been used to leach nickel wastes of plating
industry. To produce nickel oxide powder furnaces with no protecting
atmosphere and to produce pure nickel powder, tube furnace with hydrogen
atmosphere has been applied. Variables performed in the research are
time, density of sulfuric acid, and amount of hydrogen peroxide. To
analyze powders produced, EDS element analysis and to determine size of
powder particles, SEM has been applied. It was shown by the results that
the highest amount of nickel dissolution in sulfuric acid (98%) has taken
place during one hour and there is a direct relationship between hydrogen
peroxide amount and nickel dissolution in sulfuric acid.
References:

[1]Rhamdhani, M.A., Jak, E., Hayes, P.C., 2008. Basic nickel carbonate: Part I. Microstructure and phase changes during oxidation and reduction processes. Metallurgical and Materials Transactions B. 39(2), 218-233. DOI: https://doi.org/10.1007/s11663-007-9124-4 [2]Rhamdhani, M.A., Jak, E., Hayes, P.C., 2008. Basic nickel carbonate: Part II. Microstructure evolution during industrial nickel production from basic nickel carbonate. Metallurgical and Materials Transactions B. 39(2), 234-245. DOI: https://doi.org/10.1007/s11663-008-9139-5 [3]Mackenzie, M., Virnig, M., Feather, A., 2006. The recovery of nickel from high-pressure acid leach solutions using mixed hydroxide product–LIX® 84- INS technology. Minerals Engineering. 19(1), 1220- 1233. DOI: https://doi.org/10.1016/j.mineng.2006.01.003 [4]Shaheen, W.M., 2002. Thermal behaviour of pure and binary basic nickel carbonate and ammonium molybdate systems. Materials Letters. 52(4-5), 272- 282. DOI: https://doi.org/10.1016/S0167-577X(01)00406-2 [5]Al-Mansi, N.M., Abdel Monem, N.M., 2002. Recovery of nickel oxide from spent catalyst. Waste Management. 22(1), 85-90. DOI: https://doi.org/10.1016/S0956-053X(01)00024-1 [6]Oza, R., Nikhil, S., Sanjay, P., 2011. Recovery of nickel from spent catalysts using ultrasonication‐ assisted leaching. Journal of Chemical Technology & Biotechnology. 86(10), 1276-1281. DOI: https://doi.org/10.1002/jctb.2649 [7]Randhawa, N.S., Kalpataru, G., Manoj, K., 2016. Leaching kinetics of spent nickel–cadmium battery in sulphuric acid. Hydrometallurgy. 165(1), 191-198. DOI: https://doi.org/10.1016/j.hydromet.2015.09.011 [8]Idris, J., Musa, M., Yin, C.Y., et al., 2010. Recovery of nickel from spent catalyst from palm oil hydrogenation process using acidic solutions. Journal of Industrial and Engineering Chemistry. 16(2), 251-255. DOI: https://doi.org/10.1016/j.jiec.2010.01.044 [9]Abrar, B., Mohammad, H., Ali, P., 2016. Recovery of nickel from reformer catalysts of direct reduction, using the pressurized dissolving method in nitric acid. Engineering, Technology & Applied Science Research. 6(5), 1158-1161. DOI: https://doi.org/10.48084/etasr.731 [10]Gharabaghi, M., Mehdi, I., Amir, R.A., 2013. Leaching kinetics of nickel extraction from hazardous waste by sulphuric acid and optimization dissolution conditions. Chemical Engineering Research and Design. 91(2), 325-331. DOI: https://doi.org/10.1016/j.cherd.2012.11.016 [11]Liu, F., Li, N., Zhang, Z., et al., 2008. An improved purification method for preparation of basic nickel carbonate of high purity via chemical precipitation. Journal of Wuhan University of Technology-Mater. 23(3), 331-333. DOI: https://doi.org/10.1007/s11595-007-3331-3 [12]Li, Y., Li, P., Xin, Z., 2017. Hydrothermal synthesis of hierarchical nickel-or cobalt-based carbonate hydroxides for supercapacitor electrodes. International Journal of Electrochemical Science. 12, 4016-4024. DOI: https://doi.org/10.20964/2017.05.50 [13]Wu, X., Xing, W., Zhang, L., 2012. Nickel nanoparticles prepared by hydrazine hydrate reduction and their application in supercapacitor. Powder Technology. 224, 162-167. DOI: https://doi.org/10.1016/j.powtec.2012.02.048 [14]Huang, G.Y., Xu, S.M., Gang, X.U., et al., 2009. Preparation of fine nickel powders via reduction of nickel hydrazine complex precursors. Transactions of Nonferrous Metals Society of China. 19(2), 389-393. DOI: https://doi.org/10.1016/S1003-6326(08)60283-6 [15]Li, Y.D., Li, C.W., Wang, H.R., et al., 1999. Preparation of nickel ultrafine powder and crystalline film by chemical control reduction. Materials Chemistry and Physics. 59(1), 88-90.‏ DOI: https://doi.org/S0254-0584(99 )00015-2 [16]Bai, L., Fan, J., Hu, P., et al., 2009. RF plasma synthesis of nickel nanopowders via hydrogen reduction of nickel hydroxide/carbonate. Journal of Alloys and Compounds. 481(1-2), 563-567. DOI: https://doi.org/10.1016/j.jallcom.2009.03.054 [17]Ying, Z., Shengming, J., Guanzhou, Q., et al., 2005. Preparation of ultrafine nickel powder by polyol method and its oxidation product. Materials Science and Engineering: B. 122(3), 222-225. DOI: https://doi.org/10.1016/j.mseb.2005.06.006 [18]Paserin, V., Baksa, S., Zaitsev, A., et al., 2008. Potential for mass production of nickel-based nanomaterials by carbonyl process. Journal of Nanoscience and Nanotechnology. 8(8), 4049-4055. DOI: https://doi.org/10.1166/jnn.2008.AN44 [19]Michalcová, A., Svobodová, P., Nováková, R., et al., 2014. Structure and magnetic properties of nickel nanoparticles prepared by selective leaching. Materials Letters. 137, 221-224. DOI: https://doi.org/10.1016/j.matlet.2014.09.012 [20] Agrawal, A., Bagchi, D., Kumari, S., et al., 2007. Recovery of nickel powder from copper bleed electrolyte of an Indian copper smelter by electrolysis. Powder Technology. 177(3), 133-139. DOI: https://doi.org/10.1016/j.powtec.2007.03.032

Tags: